Using the Autodesk Inventor Variable-Radius Fillet

Posted July 25, 2013 by Robert Reid, Synergis Manufacturing Solutions Engineer:

A Variable-Radius Fillet contains a radius that varies along the length of a specified edge. To create the fillet, a location along the specified edge is initially created as the start point, and then afterwards, a second point is specified as the endpoint. You can also add intermediate points, each of which can have a different radius. The transition type will determine the shape of Variable-Radius Fillet.

Let’s look at the following example. A plate is modeled 6” wide, 4” high, 3/4” thick.

On the Modify Panel, click Fillet.

Click on Variable:

Let’s walk through an example.

1. First, select the edge:

2.  The Start Point is highlighted along the specified edge with a white arrowhead:

3.  The End Point is the highlighted with a white arrowhead:

4.  The Radius is also shown for both the start and end positions.

5.  The position values that are shown represent a percentage of the line.  0.0 represents 0 (zero), 1.0 represents 100% of the line.

6.  Here, I select 2 points along this edge:

7.  Point 1 represents 23.40% of the line or 0.234 x 6″ = 1.404″

8.  Point 2 represents 73.28% of the line or 0.7328 x 6″ = 4.3968″

9.  To adjust the values, click on the Position value and change:

10.  The Radius values can also be changed in the same matter, at the same time the Position value is being changed:

Clicking OK in the dialog box, we accept the changes that have been made:

A Variable-Radius Fillet has been created!

Have questions?  Let us know!  Call (800.836.5440) or email us for help!



See some of Bob’s previous posts:

Robert Reid graduated from Middlesex College in New Jersey with a Degree in Mechanical Engineering Technology. With over 25 years of Industrial Machine Design, including Wire Drawing Machinery, Plastic Processing Machinery, & Packaging Machinery, Robert has held various positions within the workforce, including, Manager of Engineering; Sheet Extrusion Dept, Manager of Engineering, Chief Design Engineer. He is currently an Autodesk Inventor Certified Expert.

Contact us, visit the Synergis website or subscribe to our blog.

One comment

  • I must say you are very skilled at persuasive writing if you can convince me to share your views. I am very impressed by your excellent writing abilities. Please keep up the good informational writing.

Leave a Reply to industrial equipment Cancel reply

Your email address will not be published. Required fields are marked *